DPS differential pressure sensor
Application: Bonding with Ceramic substrate and PA66
Functional requirements:
- Usage temperature and humidity is 65%RH,25℃, detect leaks when cured 24 hours later.
- Test after 5 hours of thermal aging at 125 ℃ temperature, air inlet pressure 5psi, temperature -40~125℃
| Item | Categories | Color | Product Description | Viscosity | Hardness Shore A | Temperature Range |
| SIPC 9336 | Silicone | White/Black | Alcohol type,paste,UL94 V-0,conventional adhesive | Paste | 55 | -60-200 |
| SIPC 9336T | Silicone | Translucency | Alcohol type,paste,conventional adhesive | Paste | 23 | -60-200 |
| SIPC 9339 | Silicone | White/Black/Gray | Alcohol type,paste,conventional adhesive | Paste | 45 | -60-200 |
Hall effect position sensor
Application: locality potting of inside shell
Functional requirements:
- Protection of internal line, waterproof,
- High bonding strength with PA66+30% glass fiber material
- Epoxy encapsulant
| Item | Categories | Color | Product Description | Mix Ratio | Mix viscosity | Hardness Shore A | Temperature Range |
| EP 6102 | Epoxy | A:Black B:Brown | General use potting material | 5:1 | 1800 | 80 | -50-120 |
| EP 6112 | Epoxy | A:Black B:Brown | Fireproof potting compound UL94V-0 | 5:1 | 3000 | 80 | -50-120 |
| EP 6113 | Epoxy | A:Black B:Clear | Potting compound for generator or electric motor,low CTE | 100:8 | 2500 | 90 | -40-180 |
Tire pressure sensor
Application: locality potting of inside shell
Functional requirements:
- Waterproof, shock resistance and weather resistance
- Low impact on radio-frequency performance (low dielectric constant)
- Certain bonding strength with PA66+30% glass fiber material, temperature resistance from – 40 to 85℃
- Epoxy encapsulant
