Silicone, Epoxy, Polyurethane adhesive for Electronics-Elaplus

Product Center

Thermal Adhesive/Potting Compound/Conformal Coating/Silicone Gel

SIPC 9338 Transparent Silicone Adhesive Sealant

Product Description RTV SIPC 9338 neutral dealcoholized silicone adhesive sealant is a fluid hygroscopic curing silicone. After curing, it forms a flexible rubber body, which fully complies with the requirements of the EU ROHS directive. Alcohol substances are released during the curing process. It has no corrosion to materials such as polycarbonate (PC) and copper. It has good bonding and sealing properties for most materials, protecting electronic products in harsh conditions in a stable state. Feature: Application areas

PUR 5110 A/B Adhesive

Product Description PUR 5110 A/B is a two-component solvent-free room temperature curing adhesive. Low odor, low VOC, in line with ROHS and REACH regulations. The process has wide operability and high physical properties of the finished product. It is suitable for machine dispensing and manual mixing operations; after curing, it has good adhesion, strong adhesion, excellent flexibility and elasticity, and good aging resistance and chemical resistance. Suitable for sealing and bonding various materials such as metal, plastic, rubber, polyester, etc. Feature

SIPC 9339 Silicone Adhesive Sealant

Product Description:RTV SIPC9339 dealcoholized silicone adhesive sealant is a neutral silicone sealing material that absorbs moisture in the air and solidifies at room temperature.It is non-corrosive to materials and has good bonding and sealing properties for most plastics, metals and other materials, protecting electronic products in harsh conditions in a stable state. Feature:1 Excellent chemical resistance, low odor, good adhesion2 Low volatility not exceeding 500ppm, no corrosion and no fogging in a closed environment3 Resistant to moisture, dirt and other atmospheric components4 Reduce mechanical stress and tension caused by mechanical, thermal shock and vibration5 Excellent outdoor aging resistance, service life up to 20-30 years6 Stable mechanical and electrical properties between -60-200℃ Applications: Household appliances, construction machinery, photovoltaic module sealing, automotive…

EP 621 one-component epoxy adhesive

Product Description EP 621 is a black, solvent-free, one-component epoxy structural adhesive. This product has good toughness and impact strength. When it is fully cured by heat, it can provide excellent bonding performance, electrical properties, moisture resistance and mechanical properties. It has high bonding strength to most substrates including glass, metal, ceramics, etc., and can meet the bonding and mechanical performance requirements at high temperatures. It is widely used in automotive electronics, pressure sensors, wiring harnesses, and motor magnetic sheet bonding.

SIPA9446 One-component, addition-curing silicone adhesive

Product Features1.Single component semi-flow, fast heating and curing2.Black silicone elastomer adhesive3.Can be bonded to more substrates without primer, such as stainless steel, glass, ceramics, etc.4.Excellent flexibility and tear resistance5.Addition curing system: no curing by-products6.FDA food certification, ROHS\REACH certification7.Maintain elasticity and stability in the temperature range of -60℃~+280℃ Product ApplicationsMainly designed for bonding and sealing of electronic parts, FIPG on-site forming sealingDesigned to provide long-term thermal stability bonding for various metal, glass, plastic, and ceramic substratesTypical applications include: bonding of plastic shells and aluminum plates of automotive electronic devices, sealing of steam chambers and bottom plates of electric irons, bonding of chassis of hot water kettles, lamination of heating elements, and fixed bonding of wafers

SIPC 9102 Silicone adhesive sealant-RTV Silicone

Product Description: RTV 9102 oxime-type silicone adhesive sealant is a kind of neutral silicone sealing material that absorbs moisture in the air at room temperature, and can not be cured by heating.It is the vast majority of materials have a good adhesive sealing performance, protection in the harsh conditions of electronic products. Non-transparent portion of the color by 94 V-0 flame retardancy UL (NUMBER: E340199) authentication, as is now available product Red 9102; 9102 and HB in black and white level equivalents. FEATURES1.Self-leveling, easy to operate2.Resistance to moisture, dirt and other atmospheric components3.Reduce the mechanical stress and tension caused by mechanical, thermal shock and vibration4.Excellent electrical insulation, anti-corona5.Outdoor aging excellent, the service life of up to 20-30 years6.Stable mechanical and…

SIPC 9333 Sealant-self leveling for sealing and bonding

Production description: SIPC 9333 Neutral Cure Sealant is designed for diverse and assembly applications.General uses include bonding and sealing, formed-in place gasket and maintenance applications. Feature:Mirco-flow, self leveling Cures at room temperature upon exposure to moisture in the airPrimerless adhesion to many materialsAdhesion to many plastics, metals, painted surfaces, glass and rubbersDoes not react with or corrode most metals or plasticsBroad temperature range performance; cured material stays flexible from -60 to 250°CListed on UL QMFZ2 94 V-0 Application:

EP 6618 Epoxy Adhesive-Low temperature curing Adhesive

Product Description: EP 6618 is a low-temperature curing one-component epoxy adhesive with high adhesion, low water absorption,suitable for bonding a wide range of materials, and good storage stability. Typical application: It is mainly used for LED back light module lens bonding, and camera module CCD/CMOS frame bonding, suitable for the bonding of temperature-sensitive components.

EP1716A/B 2K Thermal conductive Epoxy potting material

Color: A:Black liquid; B:Light yellow liquid
Viscosity(25°c,m Pa·with): A:40,000+10,000;B:100+50
Appication: tis suitable for packagqing protection of products with hioh themal conductity requirementsinmotors, automotive electonics. oertools reactors.and instrumenis. and has excelent adhesion ai
temperature resistance.

SIPA 8230(7#)A/B low-density potting silicone

Product Description: SIPA 8230(7#) A/B is a two-component low-density silicone potting adhesive. It has good fluidity after mixing. The operation time can be adjusted according to the temperature. It can be deeply cured at room temperature. It is suitable for potting protection of various heat dissipation and temperature-resistant components. It fully complies with the EU ROHS directive and SVHC REACH requirements. Feature

EP 6220 epoxy resin adhesive-Suitable for potting and structural bonding

Product Description: 6220 epoxy adhesive is a room temperature/heat curing resin adhesive. This two-component adhesive is designed for metal bonding, SMC fiberglass parts bonding, aluminum honeycomb panel splicing, motor product iron core bonding, ceramic membrane component sealing, soft magnetic unit potting, high temperature resistant sensor potting, etc. Feature: 1.Resistant to moisture, dirt and other atmospheric components2.High strength, excellent adhesion3.Good anti-pollution, low surface pretreatment requirements4.No solvent, no curing by-products5.Excellent high and low temperature resistance, -50℃-150℃6.Resistant to transformer oil, low attenuation7.Good adhesion to glass fiber cloth and steel plate

SIPC 8125 A/B Silicone Potting Adhesive

Product Description: SIPC 8125 A/B is a normally popular potting material. It supplies stable protection to variety of electric components.The mixture is flowable, would be deeply cured. Theoperation time can be adjusted according to the temperature and agent added.The majority of materials have a good bonding effect without primer, suitable for accessories fixed and waterproof, dust and leakage. Feature: 1)Two-component, condensation de-alcohol type2)Low viscosity, easy processing3)Low hardening shrinkage, no corrosion without stress4)Excellent high temperature electrical insulation, stability set5)Excellent adhesion, good waterproof, moisture resistance Applications：1)Automotive electronics, modules2)Power control module3)Solar module junction box4)LED spotlights, wall washer, bar lights, LED lamps

EP 6108-5 A/B 2K Transparent Epoxy Encapsulant

Product descriptionEP 6108 series is a two-component solvent-free ambient curable epoxy structural adhesive with low viscosity, high hardness, chemical resistance and mechanical properties. Feature:Low viscosity, good toughnessHigh transparency, no wrinkles on the surfaceExcellent electrical insulation and stabilityGood waterproof and moisture-proofOperating temperature range -40-120 °C

EP 6118 Grey Epoxy Structural Encapsulant

Product descriptionEP 6118 Grey Epoxy Structural Encapsulant is an epoxy adhesive with fast chamber curing speed.This two-component epoxy adhesive is designed to bond ceramics, metals, glass, plastics, rubber, paper, cloth and other products.EP 6118 grey epoxy structural potting adhesive cures without heating. After thoroughlymixing the A and B components with 3:1 (weight ratio or volume ratio), the product has a long operating time of 2 hours, good foaming, and forms a gray hard protective layer after curing. Feature1.Resistant to moisture, dirt and other atmospheric components2.High strength, excellent adhesion3.Good anti-pollution and low surface pretreatment requirements4.No solvents, no curing by-products5.Stable mechanical and electrical properties between -5 0-120°C6.It has good adhesion to plastic PC, glass fiber and steel plate

EP 6112 A/B Potting Compound Material-Flame Retardant Epoxy Resin

Product Description: EP 6112 is a two-component solvent-less, room temperature curing epoxy potting material for automotive, automotive electronics, power tools, reactors, instruments with high thermal conductivity requirements of the product package protection, and has excellent adhesion and heat resistance. FEATURES1.Heat curing will bring high heat resistance2. Excellent adhesion, anti-cracking3.Low CTE linear expansion coefficient4. Having a high thermal conductivity5.Excellent electrical insulation, stability6. UL approved，yellow card number is E3401997.Very low water absorption, good waterproof, moisture resistance

EP 6688 One-component Epoxy Encapsulant

Product Description: EP 6688 epoxy encapsulant is one component epoxy adhesive cured by heat, designed for general structure adhesive applications.The cured material can provide excellent shear strength, along with impact and heat resistance. It ‘s designed for protection of bare semiconductor devices. BGA, IC memory cards, Chip carriers, Hybrid circuits, Chip-on-board, Multi-chip modules and Pin grid arrays , Automotive applications. Feature: One component ,solvent freeEasy to handlingLow stressNo Halogenlow VOC, low odorHigh shear and impact strengthHigh temperature resistanceExcellent outing agingExcellent electrical insulationGood moisture resistanceExhibits relatively high flow

SIPA 8706 A/B Two-component dielectric insulating silicone gel

Product Description Elaplus SIPA 8706 is a transparent two-component self-healing silicone gel that forms a buffered, self-healing, and extremely soft material after curing. It is used to isolate moisture and other harmful contaminants from contacting circuit boards and provide insulation for high voltages. Another use is to provide power relief to protect circuits and interconnects from high temperatures and mechanical stress. Application Power semiconductors, electronic sensors, automotive ECU integrated modules, etc. Packaging and protecting IC chips, submarine optical fiber potting, etc.

SIPA 8606 A/B Two-component dielectric insulating silicone gel

Product Description: SIPA 8606 It is a transparent two-component self-healing silicone gel, which becomes a special soft material with buffer and automatic recovery after curing. It is used to isolate moisture and other harmful contaminants from contacting the circuit board, and provide an insulator for high voltage. Another use is to provide stress relief to protect circuits and inter connectors from high temperatures and mechanical stress. Typical application Power Semiconductor, electronic sensor, MEMS Top Coating, Automobile Ecu integrated module and other packaging protection IC chips, undersea fiber potting and so on.

SIPC 9061 Low Viscosity Silicone

SIPC 9061 silicone gel is a low viscosity neutral silicone gel with a solid content of 100%, used for thin layer potting, self-leveling, good permeability, can also be used for conformal coating of circuit boards,easy to spray, dip, brush or pour, applied to the protective coating of rigid and flexible printed wiring boards and the protective coating of impregnated porous substrates. FeatureOne-component, low viscosity solvent-free, environmentally friendlyHigh transparency, room temperature curing, good adhesionAfter curing, it is stable and elastic at -60 – 200°CGood adhesion to most substrates without primingExcellent waterproof, anti-corrosion, moisture-proof and electrical insulation properties ApplicationIt is suitable for coating thick film circuit systems and printed circuit boards;LCM LCD frame sealing;Other applications requiring good permeability.

SIPA 8250 A/B Optical-grade two-component liquid silica gel

SIPA 8250 is a high-purity two-component hot-cured silicone material. Mainly designed for manufacturing optical device module, and can be used for injection molding optical lens and optical wave guide coupling to reduce the scattering loss, resist the influence of environmental pollution, moisture, impact, vibration, and can be in a wide range of temperature, humidity and harsh environmental conditions to maintain its optical, mechanical, and electrical characteristics. Persistent application features:

SIPC 9001 sealant for sealing and bonding

RTV SIPC 9001 is a neutral dealcoholized adhesive sealant with outstanding mechanical properties, no corrosion to the bonding material, and good bonding and sealing performance for most materials. Special Properties: 1.Room-temperature curing;2.Resist humidity and other harsh environments;3.Excellent mechanical properties，good dielectric properties;4.Self-priming adhesion; low stress. Applications: 1.LED lamps sealed, plastic metal shell sealing;2.PCB board components, wiring harness fixed;3.Electronic accessories, electrical and communications equipment coating.

Elaplus SIPA 1822 Two component solid dielectric insulating silicon gel

Elaplus SIPA 1822 Two Component Solid Dielectric Insulating Silicon Gel

ELAPLUS SIPA 8707 two-component solid silicone potting adhesive (dielectric insulating silicon gel)

Appearance: Transparent
Type: two-component
Application: Used in power semiconductors, electronic sensors, automotive ECU integrated modules and other packaging protection IC chips, undersea fiber pottage and so on.

Sticky

Silicone gel

Elaplus SIPA 8708 transparent two-component self-healing silicone gel ◆ 1:1 addition-cured with high elasticity ◆ Excellent softness, eliminating mechanical stress ◆ Extremely low oil permeability after solidification, excellent resistance to poisoning ◆ Excellent high-temperature electrical insulation, providing protection for high voltage ◆ Excellent aging resistance and weather resistance ◆ Excellent waterproof, anti-corrosion, moisture-proof, and chemical medium resistance performance

Coating 9060-L Acrylic low viscosity UV curing adhesive

Coating 9060-L acrylic acid low viscosity UV curable adhesive is a low viscosity single component silicone resin protective coating, easy to use, after curing to form a layer of optical transparent film, with excellent high and low temperature resistance, weather resistance, electrical insulation properties

BEMA UV 1013 UV curable adhesive

BEMA UV1013 is a one-component, high-viscosity UV curable adhesive that quickly cures to form a flexible adhesive layer when exposed to UV light of sufficient intensity. The product has high strength, low shrinkage, low coefficient of thermal expansion and excellent resistance to high temperature and humidity.

BEMA UV 2006 UV curing acrylic adhesive

BEMA UV 2006 is a one-component, high-viscosity UV curable adhesive that quickly cures to form a tough adhesive layer when exposed to UV light of sufficient intensity. The product has high strength, low shrinkage, low coefficient of thermal expansion and excellent resistance to high temperature and humidity.

SICOAT 921L Conformal Coating for sealing and bonding

Product description: SICOAT 921L is a one-component, none-solvent type conformal coating ,based on silicone.It cures on exposure by moisture to form an elastic silicone rubber film.SICOAT 921L has excellent corrosion-free adhesion to metals, including copper, plastics, ceramics, glass, etc, without the use of primers.Excellent high and low temperature resistance: from–60℃ to 250℃. Stably under working temperature 200 ℃ for long term.Excellent weather ability, water and chemical resistance. FeatureRoom-temperature; resist humidity and other harsh environments;Easily removable;good dielectric properties; self-priming adhesion;Prevent PCB board suffering humid and corrosive.

Sicoat 9067 Single component silicone conformal coating

Color: Transparent;
Viscosity (25 ℃ mPa · s): 200 ± 50;
Density (25 ℃ g/cm3): 0.85 ± 0.05;

Sticky

SICOAT 9060-M UV/Moisture dual curable conformal coating

Color: Light yellow liquid;
Density (25 ℃ g/cm3): 1.10 ± 0.05;
Viscosity (25 ° CmPa · s): 190 ± 60;

SICOAT 9060-L UV/Moisture dual curing conformal coating

SICOAT 9060-L is a single component, UV moisture dual cured polyurethane acrylate triple proof adhesive with excellent chemical resistance, moisture resistance, and thermal shock resistance. Rapid curing can be achieved under UV irradiation, and moisture curing can be achieved in shaded areas that are not exposed to UV light.

SICOAT 921 series silicone sealant

SICOAT 921 series silicone coating adhesive is low viscosity neutral organic silicone, solid content is 100%, easy to spray, dip, brush or pour.

SICOAT 9060 UV/Silicone Conformal Coating

SICOAT 9060 is a low viscosity single component silicone resin protective coating, easy to use, after curing to form a layer of optical transparent film, with excellent high and low temperature resistance, weather resistance, electrical insulation properties and excellent waterproof, seismic and absorption expansion and contraction, corona resistance, anti-leakage performance.

Sicoat 9007 Silicone Conformal Coating

SICOAT 9007 is an organic silicone resin conformal coating material used for surface coating of electronic components, suitable for temperatures ranging from -60 to 200 ℃. This product is suitable for coating the surface of PCB circuit boards, which can be insulated, moisture-proof, waterproof and rust proof. The surface is bright and smooth, with high mechanical strength. The paint film is highly transparent, and it has properties such as anti leakage, shock, dust, corrosion, aging, and corona resistance.

SICOAT 921 series organic silicone sealant

SICOAT 921 series silicone coating adhesive is low viscosity neutral organic silicone, solid content is 100%, easy to spray, dip, brush or pour. Protective coatings for hard and soft printed circuit boards and for impregnated porous substrates.

TCMP 8820 liquid thermal conductive gap filler

Product introductionLiquid thermal gel gasket TCMP thermal conductivity 2.0 W/mK, double-packed, thixotropic low-stress application, liquid thermal gel gasket is designed to provide enhanced thermal management for advanced automotive batteries, automotive electronics, communication equipment, etc. , compared with traditional materials, it provides enhanced reliability and reworkability. Liquid thermal conductive gel gasket TCMP is a highly adaptable material that is easy to use and can eliminate assembly tolerances, making the components in production almost low compression force, protecting solder joints and other components. The liquid thermal gel gasket can be perfectly reworked and repaired, significantly reducing the overall cost. The automatically controlled feeding can significantly reduce waste, again reducing the overall cost. It is a two-component fast-curing liquid thermal gel gasket. ,…

TCMP 8815 Liquid Thermal Conductivity Gap Filler 2.0 W/mK

Two-component room temperature fast curing thermal gel gasket Feature Application

Elaplus Grease Paste 1125 Lubricant & Sealant

FEATURES • High dielectric strength • Low volatility, Low dielectric constant • Moisture resistant, Good thermal oxidation and chemical stability •Retains its SIGR like consistency from -55°C to +200°C • Odourless • Highly water repellent Adheres readily to dry metals, ceramics, rubber, plastics and insulating resins APPLICATIONS • A moisture proof seal for aircraft, automotive and marine ignition systems and spark plug connections, disconnection junctions in electrical wiring systems also in electrical assemblies and terminals. • Used as a seal and lubricant for cable connectors, battery terminals, rubber door seals, switches and rubber and plastic O-rings and as a assembly lubricant for various metal-on-plastic and metal-on-rubber combinations.