Fluorescent conformal coating Sicoat 9060

Product description9060 is a low viscosity one-component silicone Fluorescent conformal coating that is environmental- friendly, and easy to use. After curing, it forms an optical transparent film with excellent high and low temperature resistance, weather resistance, electrical insulation and excellent waterproof, shock and absorption expansion and contraction, corona resistance and leakage resistance. It can enhance the moisture-proof and anti-fouling ability of electronic circuits and components, prevent the solder joints and conductors from being eroded, and also shield and eliminate electromagnetic interference and prevent short-circuit of the circuit, and improve the insulation performance of the circuit board.In addition, the protective film of the coating also contributes to the abrasion resistance and solvent resistance of the wires and components, and releases the pressure caused by periodic changes in temperature. Features Typical performance parameters Use processSurface treatment: remove dust, moisture (moisture) and oil from the surface of the object to be coated and keep it dry before applying. Cover: if some connectors, sockets, switches, boards and other areas are not allowed to have coated materials. Appropriate cover measures should be taken. Construction:According to the complexity of PCB, device distribution density and configuration, it can be applied by different methods such as brushing, spraying and dipFor small sprays, use manual spray guns, automatic spray, and use 100% paintSpray amount pressure will depend on the specific type of spray equipment used. The effect target is that the coating does not hang or the thickness of the primary film is generally between 0.1 and 0.4 mm. If a thicker coating is desired, it is best to obtain it by applying two thinner coatings, and it is required that the first layer be completely dried. Allow to apply the second layer Curing: it can be cured at room temperature by laying flat on the support frame after…