What is PCB?
PCB, Printed circuit board, also known as printed circuit board, commonly abbreviated as PCB or PWB, is an important electronic component that serves as the support for electronic components and the carrier for their electrical interconnection. As it is made using electronic printing technology, it is called “printing”.
Circuit boards are susceptible to adverse external factors during use, therefore ELAPLUS provides a range of PCB protection materials: PCB coating; Fixed components, heating devices, thermal conductivity, etc.
Why choose ELAPLUS?
Excellent waterproof, earthquake resistant, and absorption of expansion and contraction, corona resistance, and leakage resistance
Can form a durable coating to separate water vapor and pollutants; It can enhance the moisture and dirt resistance of electronic circuits and components, prevent solder joints and conductors from being corroded.
ELAPLUS material recommendation
Coating protective film is also beneficial for the wear resistance and solvent resistance of circuits and components, and can release the pressure caused by periodic temperature changes.
Excellent high and low temperature resistance, weather resistance, and electrical insulation performance
PCB Three Defenses
COATING 9067
Solvent based, single component, transparent, ROHS compliant, low halogen, low viscosity, surface drying time 20-40min, 47% hydrocarbon solvent, easy to repair
COATING 9060
Solvent free, single component, transparent, containing fluorescent indicator, low viscosity of 600cps, preliminary curing for 30 minutes (adhesive thickness of 0.1mm, 25 ° C)
PCB thermal bonding
SIPC 1908
Single component silicone, dealcoholized titanium, low volatility, multiple product states to choose from (paste thixotropy, paste micro stepping), multiple hardness options (ShoreA3560), flame retardant UL 94 V-0
SIPC 1910
Single component silicone with high adhesive strength, fast curing speed, low volatility, and excellent resistance to yellowing
PCB thermal management
TCMP 1935
1: 1. Mixing (thixotropic), low stress application, easy operation, low hardness and micro adhesion, compliant with ROHS, halogen-free, REACH certification
SIGR 2200 series
Thermal conductivity: 1.2-5.0W/m.K, low settling, room temperature storage, superior high and low temperature resistance, excellent weather resistance, radiation resistance, and superior dielectric properties
Inductive potting
SIPA8250
Two component addition molded silicone rubber, 1:1 mixing ratio, low hardening shrinkage rate, excellent high-temperature electrical insulation and stability stability
EP1712
Good toughness, high hardness, excellent adhesion and cracking resistance, good waterproof and moisture-proof properties, extremely low water absorption rate, good temperature resistance, short-term temperature resistance of 150 ° C
PCB component fixation
SIPC 1856
Single component silicone, dealcoholized titanium, low volatility, multiple product states to choose from (paste thixotropy, paste micro stepping), multiple hardness options (ShoreA35-60), flame retardant UL 94 V-0
SIPC 1859
Single component silicone, with high adhesive strength, fast curing speed, low volatility, and excellent resistance to yellowing.
