The main components of a motor are the stator, rotor, frame or housing, and other accessories (such as a reduction gearbox, drive controller, etc.).
As the main driving force of machinery, any malfunction in electric motors and generators can lead to costly shutdowns.
Excellent production and assembly methods can also make motor manufacturers more competitive in the market and reduce costs!
EP 621New Epoxy Adhesive
▶ Single component paste microflow
▶ Heat cured, high TG
▶Good toughness and impact resistance
EP 6209 Epoxy Adhesive
▶ Two component 2:1 volume ratio mixing
▶ Can be cured at room temperature or heat, high TG
▶ Good peeling force, high shear force
EP 6211-146 A/B Epoxy Adhesive
▶ Two component 2:1 volume ratio
▶ Can be cured at room temperature or heat
▶Good peeling force
Adhesive fixation of winding coils
EP 629 Epoxy adhesive
▶ Single component paste, semi flowing
▶ Heat cured, high TG
▶High peel strength, high adhesion, and good impact resistance
EP 627 Hot epoxy adhesive
▶Single component paste, slightly Microflow
▶Heat cured, high TG
▶Good toughness and impact resistance
Stator potting
EP 6115(2#)Thermal and temperature resistant epoxy sealant
▶ Two component high viscosity viscous body, 100:70 mass ratio
▶ Heat curing, high TG, high thermal conductivity
▶Excellent resistance to temperature shock at high and low temperatures
EP 6225(62A#) Heat-cured epoxy sealant
▶ Two component paste micro flow
▶Heat cured, high TG
▶Good toughness and impact resistance
EP 6112 Flame retardant epoxy potting compound
▶Two component medium viscosity, 100:20 mass ratio
▶Curing at room temperature or heating, conventional TG point
▶Good toughness and fast curing speed
EP 6225(8#)Flame retardant epoxy sealant
▶Two component medium low viscosity, 100:15 mass ratio
▶ Curing at room temperature or heating, conventional TG point
▶Good toughness and adhesion
Sealing of cylinder block
SIPC 587 Silicone
▶Single component room temperature cured blue sealant silicone
▶ Good rework ability and no adhesive strength
▶Good oil resistance and sealing performance
SIPC 5962 Silicone
▶Single component room temperature cured blue sealing silicone
▶ The cured material has good toughness and adhesion
▶Excellent oil resistance and sealing performance
Waterproofing of junction box
PUR 6020 Polyurethane adhesive
▶ Two component low viscosity 100:25 mass ratio
▶Transparent amber, flame retardant V-0
▶Good self draining foam performance and soft curing material
SIPC 8708 silicon gel
▶Two component low viscosity 1:1 mass ratio
▶ Colorless and transparent, with long operation time
▶ Self repairing gel, waterproof grade IP68
