Air high efficiency filter: the filter membrane is bonded and fixed to the base
Air high efficiency filter: the filter membrane is bonded and fixed to the base
Adhesive solutions for industrial filters
Adhesive solutions for industrial filters
Water treatment filter adhesive application solutions
Water treatment filter adhesive application solutions
Bonding • Sealing • Thermal Conductive
Find the right solution for you?
If you would like to obtain samples, product TDS, technical knowledge or documentation, please contact our technicians for assistance
Click for sample
18121160382
Hot product recommendation
If you would like to obtain samples, product TDS, technical knowledge or documentation, please contact our technicians for assistance
Elaplus SIPA 1822 Two component solid dielectric insulating silicon gel
Elaplus SIPA 1822 Two Component Solid Dielectric Insulating Silicon Gel
ELAPLUS SIPA 8707 two-component solid silicone potting adhesive (dielectric insulating silicon gel)
Appearance: Transparent
Type: two-component
Application: Used in power semiconductors, electronic sensors, automotive ECU integrated modules and other packaging protection IC chips, undersea fiber pottage and so on.
Sticky
ELAPLUS PUR 1650 A/B Thermal conductive structural adhesive
PUR 1650 A/B is a two-component solvent-free room temperature curing adhesive. Low odor, low VOC, compliant with ROHS and REACH regulations.
EP1716A/B 2K Thermal conductive Epoxy potting material
Color: A:Black liquid; B:Light yellow liquid
Viscosity(25°c,m Pa·with): A:40,000+10,000;B:100+50
Appication: tis suitable for packagqing protection of products with hioh themal conductity requirementsinmotors, automotive electonics. oertools reactors.and instrumenis. and has excelent adhesion ai
temperature resistance.
SIPA 8230(7#)A/B low-density potting silicone
Product Description: SIPA 8230(7#) A/B is a two-component low-density silicone potting adhesive. It has good fluidity after mixing. The operation time can be adjusted according to the temperature. It can be deeply cured at room temperature. It is suitable for potting protection of various heat dissipation and temperature-resistant components. It fully complies with the EU ROHS directive and SVHC REACH requirements. Feature
EP 6220 epoxy resin adhesive-Suitable for potting and structural bonding
Product Description: 6220 epoxy adhesive is a room temperature/heat curing resin adhesive. This two-component adhesive is designed for metal bonding, SMC fiberglass parts bonding, aluminum honeycomb panel splicing, motor product iron core bonding, ceramic membrane component sealing, soft magnetic unit potting, high temperature resistant sensor potting, etc. Feature: 1.Resistant to moisture, dirt and other atmospheric components2.High strength, excellent adhesion3.Good anti-pollution, low surface pretreatment requirements4.No solvent, no curing by-products5.Excellent high and low temperature resistance, -50℃-150℃6.Resistant to transformer oil, low attenuation7.Good adhesion to glass fiber cloth and steel plate
SIPC 8125 A/B Silicone Potting Adhesive
Product Description: SIPC 8125 A/B is a normally popular potting material. It supplies stable protection to variety of electric components.The mixture is flowable, would be deeply cured. Theoperation time can be adjusted according to the temperature and agent added.The majority of materials have a good bonding effect without primer, suitable for accessories fixed and waterproof, dust and leakage. Feature: 1)Two-component, condensation de-alcohol type2)Low viscosity, easy processing3)Low hardening shrinkage, no corrosion without stress4)Excellent high temperature electrical insulation, stability set5)Excellent adhesion, good waterproof, moisture resistance Applications：1)Automotive electronics, modules2)Power control module3)Solar module junction box4)LED spotlights, wall washer, bar lights, LED lamps
EP 6108-5 A/B 2K Transparent Epoxy Encapsulant
Product descriptionEP 6108 series is a two-component solvent-free ambient curable epoxy structural adhesive with low viscosity, high hardness, chemical resistance and mechanical properties. Feature:Low viscosity, good toughnessHigh transparency, no wrinkles on the surfaceExcellent electrical insulation and stabilityGood waterproof and moisture-proofOperating temperature range -40-120 °C
EP 1718 Grey Epoxy Structural Encapsulant
Appearance: Gray liquid
Viscosity mPa·s(25°C):10000-15000
SIPC 9338 Transparent Silicone Adhesive Sealant
Product Description RTV SIPC 9338 neutral dealcoholized silicone adhesive sealant is a fluid hygroscopic curing silicone. After curing, it forms a flexible rubber body, which fully complies with the requirements of the EU ROHS directive. Alcohol substances are released during the curing process. It has no corrosion to materials such as polycarbonate (PC) and copper. It has good bonding and sealing properties for most materials, protecting electronic products in harsh conditions in a stable state. Feature: Application areas
PUR 5110 A/B Adhesive
Product Description PUR 5110 A/B is a two-component solvent-free room temperature curing adhesive. Low odor, low VOC, in line with ROHS and REACH regulations. The process has wide operability and high physical properties of the finished product. It is suitable for machine dispensing and manual mixing operations; after curing, it has good adhesion, strong adhesion, excellent flexibility and elasticity, and good aging resistance and chemical resistance. Suitable for sealing and bonding various materials such as metal, plastic, rubber, polyester, etc. Feature
EP 621 one-component epoxy adhesive
Product Description EP 621 is a black, solvent-free, one-component epoxy structural adhesive. This product has good toughness and impact strength. When it is fully cured by heat, it can provide excellent bonding performance, electrical properties, moisture resistance and mechanical properties. It has high bonding strength to most substrates including glass, metal, ceramics, etc., and can meet the bonding and mechanical performance requirements at high temperatures. It is widely used in automotive electronics, pressure sensors, wiring harnesses, and motor magnetic sheet bonding.
SIPA9446 One-component, addition-curing silicone adhesive
Product Features1.Single component semi-flow, fast heating and curing2.Black silicone elastomer adhesive3.Can be bonded to more substrates without primer, such as stainless steel, glass, ceramics, etc.4.Excellent flexibility and tear resistance5.Addition curing system: no curing by-products6.FDA food certification, ROHS\REACH certification7.Maintain elasticity and stability in the temperature range of -60℃~+280℃ Product ApplicationsMainly designed for bonding and sealing of electronic parts, FIPG on-site forming sealingDesigned to provide long-term thermal stability bonding for various metal, glass, plastic, and ceramic substratesTypical applications include: bonding of plastic shells and aluminum plates of automotive electronic devices, sealing of steam chambers and bottom plates of electric irons, bonding of chassis of hot water kettles, lamination of heating elements, and fixed bonding of wafers
SIPC 9102 Silicone adhesive sealant-RTV Silicone
Product Description: RTV 9102 oxime-type silicone adhesive sealant is a kind of neutral silicone sealing material that absorbs moisture in the air at room temperature, and can not be cured by heating.It is the vast majority of materials have a good adhesive sealing performance, protection in the harsh conditions of electronic products. Non-transparent portion of the color by 94 V-0 flame retardancy UL (NUMBER: E340199) authentication, as is now available product Red 9102; 9102 and HB in black and white level equivalents. FEATURES1.Self-leveling, easy to operate2.Resistance to moisture, dirt and other atmospheric components3.Reduce the mechanical stress and tension caused by mechanical, thermal shock and vibration4.Excellent electrical insulation, anti-corona5.Outdoor aging excellent, the service life of up to 20-30 years6.Stable mechanical and…
